Brodit holder, TS, SM10, SM15

Brodit holder, TS, SM10, SM15

BRODIT
Holder, tilt swivel, fits for: SM10, SM15, SM20 (without protective case)
511755
Produktas Europos sandėlyje. Pristatymas 3-6 d.d. po apmokėjimo
€51.00 €61.71 (with VAT)
Tax excluded

help_outlineAsk about product
Brodit holder, TS, SM10, SM15

Brodit holder, TS, SM10, SM15

Holder, tilt swivel, fits for: SM10, SM15, SM20 (without protective case)

 

You might also like

Brodit pedestal mount , 6.5

Brodit pedestal mount , 6.5

202010
Pedestal mount 6.5'', total length: 165 mm, with ball and wing nut, AMPS holes

€48.50 without VAT

Brodit Mounting bracket

Brodit Mounting bracket

213457
Mounting bracket, optimized for touch screens, PDAs, taximeter screens and printers

€69.75 without VAT

Brodit Vehicle Mount

Brodit Vehicle Mount

213476
Vehicle Mount, fits for: Mercedes Benz Actros 4 13-19

€69.75 without VAT

Brodit wingnut

Brodit wingnut

215670
Wingnut, for Pedestal Mount

€26.00 without VAT

Brodit tripple suction mount

Brodit tripple suction mount

215675
Tripple suction cup holder, 2 x AMPS holes, weight: 459 g

€98.50 without VAT

Brodit mount, MMC, PM, QLn320

Brodit mount, MMC, PM, QLn320

215842
Mount, MultiMoveClip, 2'' Pedestal Mount, fits for: QLn320

€164.75 without VAT

Brodit Pedestal Mount

Brodit Pedestal Mount

215888
Heavy Duty Pedestal Mount, max. width: 87mm, length: 114mm

€213.50 without VAT

Brodit pedestal mount for forklift, L: 172 mm, W: 97 mm

Brodit pedestal mount for forklift, L: 172 mm, W: 97 mm

215981
Forklift pedestal mount Lite, length: 172 mm, for rods and tubes from 5 mm to 130 mm thick, width max: 97 mm, AMPS holes, incl: screws, nuts, washers, Allen wrench

€106.00 without VAT

Brodit mount, MMC, QLn420

Brodit mount, MMC, QLn420

216004
Mount, with MultiMoveClip, ABS/Acetal, AMPS holes, fits for: QLn420

€76.00 without VAT

Brodit holder, passiv

Brodit holder, passiv

216012
Holder, passiv, ABS/Acetal, AMPS holes, fits for: LI3600 Series, DS3600 Series

€64.75 without VAT

Brodit charging station (MOLEX),TC20

Brodit charging station (MOLEX),TC20

216023
Charging station (MOLEX),12/24 V, MOLEX, vibration-resistant, ABS/Acetal, AMPS holes, fits for: TC20 (with pistol grip)

€189.75 without VAT

Brodit vehicle charging station, TS, locking device, M60

Brodit vehicle charging station, TS, locking device, M60

216026
Vehicle charging station, tilt swivel, interlock, incl.: vehicle power supply (12/24 V), fits for: M60

€171.00 without VAT

Brodit wall/table mount, Alpha-3RW

Brodit wall/table mount, Alpha-3RW

216073
Wall/table mount, with MultiMoveClip, ABS/Acetal, fits for: Alpha-3RW

€123.50 without VAT

Brodit charging station (MOLEX), MC3300

Brodit charging station (MOLEX), MC3300

216085
Charging station (MOLEX), 10-30 V, MOLEX, incl.: Power supply (open cable end), fits for: MC3300 with pistol grip

€179.75 without VAT

Brodit charging station (MOLEX), locking, MC3300

Brodit charging station (MOLEX), locking, MC3300

216088
Charging station (MOLEX), tilt swivel, interlock, 12/24 V, MOLEX, incl.: Power supply (open cable end), fits for: MC3300

€248.50 without VAT

Brodit charging station, TC21/26

Brodit charging station, TC21/26

216137
Charging station, desktop, fits for: Zebra TC21/TC26

€133.50 without VAT

Brodit mount, passive

Brodit mount, passive

216200
Mount, passive, with lock, fits for: MC3300R

€146.00 without VAT

Brodit holder, TS, SM10, SM15, SM20

Brodit holder, TS, SM10, SM15, SM20

511756
Holder, tilt swivel, fits for: SM10, SM15, SM20 (with protective case)

€66.00 without VAT

Brodit holder, TS, ET5X (10 inch)

Brodit holder, TS, ET5X (10 inch)

511784
Holder, tilt swivel, fits for: ET5X (10 inch)

€53.50 without VAT

Brodit holder, TS, height: 120 mm to 150 mm

Brodit holder, TS, height: 120 mm to 150 mm

511848
Holder, adjustable holder, tilt swivel, ABS/Acetal, fits for: Trays with a height of 120 mm to 150 mm and a thickness of up to 25 mm

€84.75 without VAT

Brodit holder, TS, TC5X

Brodit holder, TS, TC5X

511926
Holder, tilt swivel, fits for: TC5X (with protective case)

€51.00 without VAT

Brodit vehicle charging station, TS, DL-Axist

Brodit vehicle charging station, TS, DL-Axist

512833
Vehicle charging station, tilt swivel, incl.: vehicle power supply (12/24 V), fits for: DL-Axist (without protective case)

€118.50 without VAT

Brodit vehicle charging station, TS, DL-Axist

Brodit vehicle charging station, TS, DL-Axist

512834
Vehicle charging station, tilt swivel, incl.: vehicle power supply (12/24 V), fits for: DL-Axist (with protective case)

€118.50 without VAT

Brodit charging station (MOLEX),MC55, MC65, MC67

Brodit charging station (MOLEX),MC55, MC65, MC67

513013
Charging station (MOLEX),10/24 V, MOLEX, incl.: Power supply (open cable end), fits for: MC55, MC65, MC67

€109.75 without VAT

Brodit charging station (MOLEX), TS, SM10, SM15

Brodit charging station (MOLEX), TS, SM10, SM15

513756
Charging station (MOLEX), tilt swivel, 10/24 V, MOLEX, incl.: Power supply (open cable end), fits for: SM10, SM15 (with protective case)

€124.75 without VAT

Brodit holder, TS, with lock, ET50 (8''), ET55 (8'')

Brodit holder, TS, with lock, ET50 (8), ET55 (8)

539777
Holder, tilt swivel, with lock (incl.: two keys), fits for: ET50 (8''), ET55 (8'')

€97.25 without VAT

Brodit charging station (MOLEX),with lock, ET5X (10'') (protective case)

Brodit charging station (MOLEX),with lock, ET5X (10) (protective case)

539892
Charging station (MOLEX),with lock (incl.: two keys), fits for: ET5X (10'') (protective case)

€387.25 without VAT

Brodit charging station (MOLEX),with lock, ET5X (8'') (protective case, extension module)

Brodit charging station (MOLEX),with lock, ET5X (8) (protective case, extension module)

539893
Charging station (MOLEX),with lock (incl.: two keys), order separate: power supply, fits for: ET5X (8'') (protective case, extension module)

€413.50 without VAT

Brodit holder, with lock, ET5X (8'') (protective case)

Brodit holder, with lock, ET5X (8) (protective case)

539961
Holder, with lock (incl.: two keys), USB, power supply port, fits for: ET5X (8'') (protective case)

€428.50 without VAT

Brodit holder, with lock, ET5X (10'') (protective case)

Brodit holder, with lock, ET5X (10) (protective case)

550888
Holder, with lock (incl.: two keys), ABS/Acetal, fits for: ET5X (10'') (protective case)

€418.50 without VAT

Brodit mount, passive, SM10, SM15

Brodit mount, passive, SM10, SM15

710158
Mount, passive, with vibration dampeners, AMPS, fits for: SM10, SM15

€106.00 without VAT

Brodit vehicle holder

Brodit vehicle holder

710267
Vehicle holder, drilling: AMPS, VESA 75, module upgrade, order separately: vehicle mount, fits for: ET5X (8.4'' with rugged frame)

€138.50 without VAT

Brodit holder, TS, MC3200

Brodit holder, TS, MC3200

711027
Holder, tilt swivel, fits for: MC3200

€51.00 without VAT

Brodit holder, TS, TC20/25

Brodit holder, TS, TC20/25

711029
Holder, tilt swivel, fits for: TC20/25 (with extended battery)

€51.00 without VAT

Brodit Passive Holder

Brodit Passive Holder

711044
Passive holder with tilt swivel, fits for: Ingenico iSMP4

€44.75 without VAT

Brodit holder, TS, interlock, MC3300

Brodit holder, TS, interlock, MC3300

711056
Holder, tilt swivel, with lock, display facing the holder, fits for: MC3300 (with pistol grip)

€151.00 without VAT

Brodit mount, passive, SM10, SM15

Brodit mount, passive, SM10, SM15

711157
Mount, passive, AMPS, fits for: SM10, SM15

€97.25 without VAT

Brodit holder, TS, SL10

Brodit holder, TS, SL10

711159
Holder, tilt swivel, fits for: SL10 (w/o rugged boot)

€51.00 without VAT

Brodit holder, TS

Brodit holder, TS

711228
Holder, tilt swivel, fits for: Memor 10 (protection boot)

€51.00 without VAT

Brodit vehicle charging station, TS, TC20/25

Brodit vehicle charging station, TS, TC20/25

712019
Vehicle charging station, tilt swivel, cable type: straight, incl: vehicle power supply (12/24 V), fits for: TC20/25

€118.50 without VAT

Brodit vehicle charging station, TS, TC20/25

Brodit vehicle charging station, TS, TC20/25

712029
Vehicle charging station, tilt swivel, cable type: straight, incl: vehicle power supply (12/24 V), fits for: TC20/25 (with extended battery)

€118.50 without VAT

Brodit vehicle charging station, TS, EDA70/EDA71

Brodit vehicle charging station, TS, EDA70/EDA71

712085
Vehicle charging station, tilt swivel, cable type: straight, incl: vehicle power supply (12/24 V), fits for: EDA70

€127.25 without VAT

Brodit charging station (MOLEX),TC2X

Brodit charging station (MOLEX),TC2X

713151
Charging station (MOLEX),12/24 V, MOLEX, ABS/Acetal, AMPS holes, fits for: TC2X (with protective boot SG-TC2X-BOOT-01)

€118.50 without VAT

Brodit mount, active, SM10, SM15

Brodit mount, active, SM10, SM15

712157
Holder, active, AMPS, with cig-plug cable, fits for: SM10 (pistol grip), SM15 (pistol grip)

€163.50 without VAT

Brodit mount, active, SM10, SM15

Brodit mount, active, SM10, SM15

712158
Holder, active, AMPS, with vibration dampeners, with cig-plug cable, fits for: SM10, SM15

€172.25 without VAT

Brodit vehicle charging station, TS, SL10

Brodit vehicle charging station, TS, SL10

712159
Vehicle charging station, tilt swivel, incl.: vehicle power supply (12/24 V), fits for: SL10 (w/o rugged boot)

€118.50 without VAT

Brodit active holder

Brodit active holder

712210
Active holder with cig-plug - VeriFone V400m

€109.75 without VAT

Brodit vehicle charging station, TS, Tab Active 2, Tab Active 3

Brodit vehicle charging station, TS, Tab Active 2, Tab Active 3

712224
Vehicle charging station, tilt swivel, cable type: straight, incl: vehicle power supply (12/24 V), fits for: Galaxy Tab Active 2 (SM-T390/SM-T395), Samsung Galaxy Tab Active 3 (SM-T570/SM-T575)

€99.75 without VAT

Brodit Active Mount

Brodit Active Mount

712292
Active Mount, for device with Rugged Boot, with a tilt swivel,cig-plug-adapter, 3A, 12/24V, fits for: M3 Mobile SL20

€127.25 without VAT

Brodit charging station (MOLEX), TS, TC20/25

Brodit charging station (MOLEX), TS, TC20/25

713029
Charging station (MOLEX), tilt swivel, 10/24 V, MOLEX, incl: Power supply unit (open cable end), fits for: TC20/25 (with extended battery)

€118.50 without VAT

Brodit vehicle charging station, TS, TC2X

Brodit vehicle charging station, TS, TC2X

712151
Vehicle charging station, tilt swivel, incl: vehicle power supply (12/24 V), fits for: TC2X (with protective boot SG-TC2X-BOOT-01)

€118.50 without VAT

Brodit charging station (MOLEX), TS, SM10, SM15

Brodit charging station (MOLEX), TS, SM10, SM15

713157
Charging station (MOLEX), tilt swivel, 12/24 V, MOLEX, incl.: Power supply (open cable end), fits for: SM10, SM15 with bumper and pistol grip

€163.50 without VAT

Brodit charging station (MOLEX), TS, VD, SM10, SM15

Brodit charging station (MOLEX), TS, VD, SM10, SM15

713158
Charging station (MOLEX), vibration dampeners, tilt swivel, 12/24 V, MOLEX, incl.: Power supply (open cable end), fits for: SM10, SM15 with bumper and pistol grip

€172.25 without VAT

Brodit holder, TS, SL10

Brodit holder, TS, SL10

713159
Holder, tilt swivel, incl.: Power supply (open cable end), fits for: SL10 (w/o rugged boot)

€118.50 without VAT

Brodit Active charging station

Brodit Active charging station

713197
Charging station (MOLEX), tilt swivel, 10/24 V, MOLEX, incl.: Power supply (open cable end), fits for: TC21, TC26

€118.50 without VAT

Brodit charging station (MOLEX), TS, Tab Active 2, Tab Active 3

Brodit charging station (MOLEX), TS, Tab Active 2, Tab Active 3

713224
Charging station (MOLEX), tilt swivel, 10/24 V, MOLEX, incl: Power supply unit (open cable end), fits for: Galaxy Tab Active 2 (SM-T390/SM-T395), Samsung Galaxy Tab Active 3 (SM-T570/SM-T575)

€121.00 without VAT

Zebra ET5x 10.1 Module Upgrade

Zebra ET5x 10.1 Module Upgrade

739266
Zebra ET5x Passiv Mount lockable, 10.1 Module Upgrade, 2 keys included, for robust frame, with/without expansion module/handstrap. AMPS+VESA 75 holes. Module Upgrade Cradle.

€198.50 without VAT

Zebra ET5x Passiv Mount

Zebra ET5x Passiv Mount

739267
Zebra ET5x Passiv Mount, 8.4 Module Upgrade, 2 keys included, for robust frame, with/without expansion module/handstrap. AMPS+VESA 75 holes. Module Upgrade Cradle.

€192.25 without VAT

Brodit Passive Mount

Brodit Passive Mount

741296
Passive Mount, with pring stud locking, compatible with expansion back, handstrap and rugged boot, AMPS, VESA 75, fits for: ET80, ET85

€221.00 without VAT

Brodit Pedestal mount, 6

Brodit Pedestal mount, 6

215838
Pedestal mount 6'', total length: 164 mm, round base, AMPS holes

€134.75 without VAT

Brodit Passive Holder

Brodit Passive Holder

510813
Passive Holder, AMPS, VESA, fits for: F110G5 or older

€99.75 without VAT

Brodit holder, with lock, ET5X (10'') (protective case, extension module)

Brodit holder, with lock, ET5X (10) (protective case, extension module)

539960
Holder, with lock (incl.: two keys), fits for: ET5X (10'') (protective case, extension module)

€433.50 without VAT

Brodit pedestal mount , 7.5

Brodit pedestal mount , 7.5

202011
Pedestal mount 7.5'' with suction cup, total length: 190 mm, with ball and wing nut, AMPS holes

€57.25 without VAT

Brodit charging station (MOLEX), TS, 3-point, TC7X

Brodit charging station (MOLEX), TS, 3-point, TC7X

531707
Charging station (MOLEX), tilt swivel, 3-point, 10/24 V, MOLEX, incl: Power supply unit (open cable end), fits for: TC7X

€118.50 without VAT

Brodit vehicle charging station, TS, USB host, TC5X

Brodit vehicle charging station, TS, USB host, TC5X

712049
Vehicle charging station, tilt swivel, with USB host connection, cable type: straight, incl: vehicle power supply (12/24 V), fits for: TC5X (with protective case)

€179.75 without VAT

Brodit active holder, Zebra ET4x

Brodit active holder, Zebra ET4x

712320
Cigarette Lighter Adapter, fits for: Zebra ET4x 10'' with Rugged-Frame

€193.50 without VAT

Brodit power supply, open cable end, ET5X

Brodit power supply, open cable end, ET5X

941012
Power supply unit, MOLEX, open cable end, input and output voltage: 12 V, 3A, fits for: Brodit charger for ET5X

€84.75 without VAT

Brodit vehicle mount

Brodit vehicle mount

711307
Vehicle holder, tilt swivel, fits for: TC53/58

€52.25 without VAT

Brodit vehicle charging station, TS, TC53/58

Brodit vehicle charging station, TS, TC53/58

712306
Vehicle charging station, tilt swivel, incl.: vehicle power supply (12/24 V), fits for: TC53/58 (with rugged boot)

€128.50 without VAT

Brodit Mounting Plate with MultiMoveClip

Brodit Mounting Plate with MultiMoveClip

216461
Mounting Plate with MultiMoveClip, fits for: TM-P8011-101, TM-P8011-121

€99.75 without VAT

Brodit Cig Plug Adapter Kit

Brodit Cig Plug Adapter Kit

216462
Cig Plug Adapter Kit, includes Adapter with 1x USB-A and 1x USB-C Port, Power Cord, Screws and Mounting Clips, fits for: TM-P8011-121, TM-P8011-101, TM-P211

€68.50 without VAT

Brodit Fly Lead Kit

Brodit Fly Lead Kit

216463
Fly Lead Kit for fixed installation, incl.: Clips and Screws, fits for: TM-P8011-121, TM-P8011-101, TM-P211 

€84.75 without VAT

Brodit Passive Holder

Brodit Passive Holder

216239
Passive Holder, 83x124x58 mm (WxHxD) internal, fits for: Scanner or Devices with Pistol Grip

€53.50 without VAT

Brodit MultiMoveClip

Brodit MultiMoveClip

216460
MultiMoveClip, easy mounting solution, AMPS, ABS/Acetal Plastic, color: Black, fits for: TM-P211

€97.25 without VAT

Brodit vehicle charging station, interlock, MC9300

Brodit vehicle charging station, interlock, MC9300

712135
Vehicle charging station, interlock, cable type: straight, incl: vehicle power supply (12/24 V), fits for: MC9300

€233.50 without VAT

Brodit holder, TS, interlock, FZ-A2

Brodit holder, TS, interlock, FZ-A2

541970
Holder, tilt swivel, interlock, fits for: FZ-A2

€97.25 without VAT

Getac lockable Holder Passive

Getac lockable Holder Passive

739287
Passive Holder, VESA 75/100, AMPS, compatible with or without handstrap, lockable, 2 Keys, for: F110G6

€146.00 without VAT

Brodit holder, with lock, TC8000

Brodit holder, with lock, TC8000

510875
Holder, with closure, fits for: TC8000

€156.00 without VAT

Brodit holder, ZQ630

Brodit holder, ZQ630

216113
Holder, fits for: ZQ630

€89.75 without VAT

Brodit Pedestal Mount

Brodit Pedestal Mount

215836
Pedestal Mount with wingnut, length: 62 mm, round base, square mounting plate 50x50mm, color: Black

€103.50 without VAT

Brodit vehicle mount

Brodit vehicle mount

711306
Vehicle holder, tilt swivel, fits for: TC53/58 (with rugged boot)

€52.25 without VAT

Brodit pedestal mount for forklift, L: 172 mm, W: 72 mm

Brodit pedestal mount for forklift, L: 172 mm, W: 72 mm

215979
Forklift pedestal mount Lite, length: 172 mm, for rods and tubes from 5 mm to 130 mm thick, width max: 72 mm, AMPS holes, incl: screws, nuts, washers, Allen wrench

€103.50 without VAT

Brodit Active Holder, USB

Brodit Active Holder, USB

721335
Active holder, 12/24V, 3.0A, Tilt Swivel, incl. USB-Cable and cig-plug, order separately: protective boot, fits for: CT30XP

€118.50 without VAT

Brodit Printer Mount

Brodit Printer Mount

217072
Printer Mount with label roll function, AMPS, fits for: RP4, RP4F

€307.25 without VAT

Brodit pedestal mount for forklift, L: 140 mm, W: 72 mm

Brodit pedestal mount for forklift, L: 140 mm, W: 72 mm

215978
Forklift pedestal mount Lite, length: 140 mm, for rods and tubes from 5 mm to 130 mm thick, width max: 72 mm, AMPS holes, incl: Screws, nuts, washers, Allen wrenches

€103.50 without VAT

View
Brodit pedestal mount for forklift, L: 140 mm, W: 97 mm

Brodit pedestal mount for forklift, L: 140 mm, W: 97 mm

215980
Forklift pedestal mount Lite, length: 140 mm, for rods and tubes from 5 mm to 130 mm thick, width max: 97 mm, AMPS holes, incl: screws, nuts, washers, Allen wrenches

€106.00 without VAT

View
Brodit holder, passiv, VD

Brodit holder, passiv, VD

216013
Holder, passiv, vibration damper, ABS/Acetal, AMPS holes, fits for: LI3600 Series, DS3600 Series

€96.00 without VAT

View
Brodit holder, with lock, L10

Brodit holder, with lock, L10

216098
Holder, with lock (incl.: two keys), fits for: L10, order separately: XDIM module

€191.00 without VAT

View
Brodit voltage converter

Brodit voltage converter

216240
Voltage converter, 48 VAC, 12 VDC, fits for: ET5X

€159.75 without VAT

View
Brodit holder, reinforced, ET5X (10 inch, Rugged Frame)

Brodit holder, reinforced, ET5X (10 inch, Rugged Frame)

511914
Bracket, reinforced, ABS, fits for: ET5X (10 inch, Rugged Frame)

€172.25 without VAT

View
Brodit charging station (MOLEX),with lock, ET5X (8'') (protective case)

Brodit charging station (MOLEX),with lock, ET5X (8) (protective case)

539894
Charging station (MOLEX),with lock (incl.: two keys), fits for: ET5X (8'') (protective case)

€373.50 without VAT

View
Brodit charging cradle, USB, ET5X (10'')

Brodit charging cradle, USB, ET5X (10)

563914
Charging cradle, USB, fits for: ET5X (10'', with protective case), to be ordered separately: Power supply

€403.50 without VAT

View
Brodit vehicle holder

Brodit vehicle holder

710266
Vehicle holder, drilling: AMPS, VESA 75, module upgrade, order separately: vehicle mount, fits for: ET5X (10.1'' with rugged frame)

€144.75 without VAT

View
Brodit holder, TS, interlock, MC3300

Brodit holder, TS, interlock, MC3300

711040
Holder, tilt swivel, interlock, fits for: MC3300 (with pistol grip)

€151.00 without VAT

View
Brodit holder, tilt swivel

Brodit holder, tilt swivel

711156
Holder, tilt swivel, fits for: Samsung Galaxy Note 10+

€44.75 without VAT

View
Brodit holder, TS, UL20

Brodit holder, TS, UL20

711171
Holder, tilt swivel, fits for: UL20

€86.00 without VAT

View
Brodit holder, TS, TC21, TC26

Brodit holder, TS, TC21, TC26

711197
Holder, tilt swivel, fits for: TC21, TC26

€51.00 without VAT

View
Brodit holder, TS

Brodit holder, TS

711227
Holder, tilt swivel, fits for: Memor 10

€51.00 without VAT

View
Brodit vehicle charging station, TS, EDA51

Brodit vehicle charging station, TS, EDA51

712099
Vehicle charging station, tilt swivel, cable type: straight, incl: vehicle power supply (12/24 V), fits for:Honeywell EDA51

€118.50 without VAT

View
Brodit vehicle charging station, MC9300

Brodit vehicle charging station, MC9300

712134
Vehicle charging station, cable type: straight, incl: vehicle power supply (12/24 V), fits for: MC9300

€203.50 without VAT

View
Brodit charging station (MOLEX), TS, EDA70

Brodit charging station (MOLEX), TS, EDA70

713085
Charging station (MOLEX), tilt swivel, 10/24 V, MOLEX, incl: Power supply unit (open cable end), fits for: EDA70

€127.25 without VAT

View
Brodit vehicle charging station

Brodit vehicle charging station

713266
Vehicle charging station, drilling: AMPS, VESA 75, Module Upgrade, order separately: vehicle mount, vehicle adapter, fits for: ET5X (10.1'' with rugged frame)

€299.75 without VAT

View
Brodit vehicle charging station

Brodit vehicle charging station

713267
Vehicle charging station, drilling: AMPS, VESA 75, module upgrade, order separately: vehicle mount, vehicle adapter, fits for: ET5X (8.4'' with rugged frame)

€293.50 without VAT

View
Brodit vehicle charging station, TS, SM10, SM15, SM20

Brodit vehicle charging station, TS, SM10, SM15, SM20

721036
Vehicle charging station, tilt swivel, cable type: straight, incl: vehicle power supply (12/24 V), fits for: SM10, SM15, SM20 (with protective case)

€139.75 without VAT

View
Brodit charging station (MOLEX), TS, XCover Pro

Brodit charging station (MOLEX), TS, XCover Pro

727214
Charging station (MOLEX), tilt swivel, 10/24 V, MOLEX, incl.: Power supply (open cable end), fits for: XCover Pro (with OtterBox uniVERSE)

€127.25 without VAT

View
Brodit vehicle charging station, lockable

Brodit vehicle charging station, lockable

736266
Vehicle charging station, drilling: AMPS, VESA 75, lockable, Module Upgrade, incl.: 2 keys, order separately: vehicle mount, vehicle adapter, fits for: ET5X (10.1'' with rugged frame)

€353.50 without VAT

View
Brodit Active Mount

Brodit Active Mount

747267
Active Mount, for devices with Rugged Frame, with or without expansion module / handstrap, order separately: power supply, USB-A Host, Upgrade Module, fits for: ET5x (8'')

€336.00 without VAT

View
Brodit USB-Hub for ET5x

Brodit USB-Hub for ET5x

216258
USB-Hub for ET5x, 3x USB-A, 1x Ethernet, fits for: Module upgrade cradles

€103.50 without VAT

View
Brodit pedestal mountr, 5.0

Brodit pedestal mountr, 5.0

202016
Pedestal mount 5'', Total length: 132 mm, With ball and wing nut, AMPS holes

€48.50 without VAT

View
Brodit Pedestal Mount

Brodit Pedestal Mount

202024
Heavy duty Pedestal Mount, length: 180mm, with ball head and wingnut, mounting plate 42x50 mm with 4 mm AMPS-holes, loading weight: 3kg

€69.75 without VAT

View
Brodit vehicle power supply, ET5X

Brodit vehicle power supply, ET5X

941017
Vehicle power supply, input and output voltage: 12 V, 3A, fits for: Brodit charger for ET5X

€84.75 without VAT

View
Brodit Passive Mount

Brodit Passive Mount

739318
Passive Mount, Module Upgrade, Lock incl. 2 keys, compatible with Rugged Boot or Exoskeleton, AMPS, VESA75 fits for: ET40/ET45 (8'')

€147.25 without VAT

View
Brodit Pedestal mount, 10

Brodit Pedestal mount, 10

202020
Pedestal mount 10'', total length: 251 mm, with ball and wing nut, AMPS holes

€61.00 without VAT

View
Brodit charging station (MOLEX), MC9300

Brodit charging station (MOLEX), MC9300

713134
Charging station (MOLEX), 12/24 V, MOLEX, incl.: Power supply (open cable end), fits for: MC9300 with pistol grip

€233.50 without VAT

View
Brodit Power Supply

Brodit Power Supply

941026
Power Supply, 220V, 5,4V output, with 6-Pin Molex, incl. EU, UK, US, AUS

€58.50 without VAT

View
Brodit Passive Mount

Brodit Passive Mount

739301
Passive Mount, with key-lock, incl. 2 keys, only compatible with rugged boot, AMPS, VESA 75, fits for: ET80, ET85

€206.00 without VAT

View
Brodit dual suction mount

Brodit dual suction mount

215671
Dual suction cup holder, 2 x AMPS holes, weight: 326 g

€76.00 without VAT

View
Brodit Mounting Plate

Brodit Mounting Plate

215987
Mounting Plate, aluminum, VESA 75 and 100 holes

€39.75 without VAT

View

Product Details

Product series
Brodit mounting solutions

Attachments